Self-Sustaining 2-Stage Tesla Turbine
[ad_1]
Cryophorus 2-Stage Tesla Turbine self-runs by creating it’s own vacuum to boil water in a warm tank at low temperature. This vapor pressure runs the first stage turbine, while the second stage maintains the vacuum. This runs in this self-running mode as long as there is enough warmth in the front side tank. There will be more disclosed at the 2020 Energy Science & Technology Conference http://energyscienceconference.com, http://emediapress.com, http://vril.io, http://energyscienceforum.com, http://energeticforum.com
[ad_2]
use the turbine blades as a monopole generator
Dreams setting! Best power plain ever see in action! Void Vs mater..BRAVO!
Extremely interesting. Do you have any white paper research for review? I'd love to read more..any numerical modeling would be worth the read as well if you got it!
So Watt! BFD! Murakami is an UGLY CLOSETED FRAUDULENT PLAGIARIZING HYPOCRITE GRADE SCHOOL LEVEL EXPERIMENTER AND RUINED INNOCENT PEOPLE'S LIVES AND LIVELIHOOD! JUSTICE IS COMING!
GREAT WORK
OK. TELL ME IF I HAVE IT RIGHT?
THE PRESSURE IN THE SYSTEM IS REDUCED CAUSING A DECREASE IN BOILING POINT. THE VAPOR PRODUCED IS USED TO TURN THE TURBINE WHICH IS CONNECTED TO A GENERATOR PROVIDING ELECTRICITY. THE WATERS THEN CONDENSE AND ARE RETURNED TO THE SYSTEM TO REPEAT THE PROCESS.
People in the back… Ffffffck
Well there ya go…😃👍
I wont be holding me breath.
It gives good understanding that everything is in balance and in those balances of one level is one kind, to another level of another kind, so those two-level are two different energy, and in between that is 1 to 2, that is thru-out process which it gains from lower to higher level, like cold to heat, so it is not heated alone, not cold alone, but between as a gaining thru from cold to heat which it is de-pressure to pressure, so, pressure and de-pressure is balance of two.
So, basically, 1, 2, 3, as source, medium, and result, same as 1 + 1 is 2, 1, 2; 1 + 1 = 3, 1, 2, 3, so, 2 is the balance of two 1 which negative and positive 1, so it equals to 2 or in another way 1 as source and 2 as process and 3 as result. So, mass as gas and liquid as 1; de-pressure / pressure as 2; mechanical energy which can be felt as mass-energy as solid within the environment of 2 which causes the react as 3 as a rotate mass which it is a solid mass. So, the water as one liquid or gas mass, and vacuum as energy itself that is de-pressure to pressure, to 3 as a mass that is a solid mass. So, it is connected to most foundation system how it works by gaining to lower the energy to become density energy as balance or density energy as a mover to cause the solid mass to move. So, density energy does depend on balance, the stationary balance or/and dynamic stationary balance. So, it is all about scale which we can see, and we don't see, so what is in scale which means all things are the fractal patterns. That means it can expand that foundation principle to anything as secondary because it is connected to the primary principle.
Thank you.
(Lester) Hendershot Effect Research Center (HERC)
https://hendershot-erc.mn.co
There may be very little resistance in the vacuum, but they're still friction. There's still gravity for the bearings to overcome. 100% efficiency is not likely.
you're going to need to try and do this again with no background audio and only one person speaking. You're going to have to work from notes so that it is comprehensible. I think you're onto something but as it is it's impossible to follow. Good luck
Hi, I love this tech. Is it not possible to connect / seal the Pump exhaust to the 'Cold' tank pipe? This way you would not need the 'Vacuum" box?
Great!! Congrats!! 👏👏👏👏
It never made sense to me when my science teachers would say that you can’t extract energy from heat.
Peltier devices do it, and hell, almost all our power comes from heating water, converting that heat to kinetic energy, and then converting the kinetic energy to electricity.
The only question i have is how would you run this in a warm environment? Heating the water with solar can be done anywhere, and in a cold environment, you can use the outside temp to freeze the water and prevent vapor pressure from ruining the vacuum, but if this is done in 90 degree whether, what prevents the vapor pressure from
Building up and ruining the vacuum?
Interesting experiment Brother. Absolutely brilliant. This type of works change the way to do the things. The important thing is to do something new or change the doing things. Good job.
Alcohol has a lower cook point, would that possibly store more energy than water?
Shaubegrer not Tesla ..
Very simple thanks
I am absolutely astounded at the implications of this device. I recently installed a RHEEM hot water heat pump water heater in my basement. It's COP is advertised at 4.6 It will produce up to 140 deg. water using the air temp in the room. If the Tesla turbine runs at a COP of 5, That means I could boost the energy out by more than 10 times. I would love to collaborate. Where can I buy a 2 stage Tesla turbine to experiment with? I am an energy researcher and consultant with two web sites devoted to energy research w3dotzerwellenergydotcom and w3starlightpowerdotnet I have 12 kw of solar panels and with this TT setup could convert to 60kw?
A variable cone drive off snow mobile would get rid of gears and belts. And you could step down with torque up.. my 3cents.
Sounds like 30k rpmpossibky 50k. Which I've used tools at that speed.. and 100k psi.hydro cutters.
Very nice work.
Very cool.
Nice work. 100x bigger would really be something.
What's rpm.. ? In theory you could analyze sound ocilstiins and get rpm since laser won't work unless a hole thru lexan but I bet a rpm app on phone would be good enough..
Put 3 coils around 3 diametrically magnetized magnets along the same shaft, each offset by 120 degrees to produce 3 phase power. You should gain the benefit of being able to use individually smaller magnets and coils to produce the same amount of power.
Very interesting, really. Thanks for this implosion technology video 🙂
Tell the people in the room to shut it when the camera's rolling. Sheesh
I was wondering if you might show a schematic? The principle seems straight forward but the how is what I need.
I would also be interested in ideas about how to take the turbine energy and convert to either electrical or mechanical work.
I see applications for cooling (air conditioning) on the exhaust side.
Excellent concept. Greg
I look forward to the conference! Our Demo will be much better then, we have made a lot of progress since then and are building a metal turbine pump combo, with very close tolerances.
Pulling a vacuum takes a ton of energy.
The pump bearings are sucking energy.
The vibrations are sucking energy.
The water will continue to boil until it is complete water vapor and the vacuum is gone.
So it doesn't appear that this is adding any value.
What am I missing?
Thanks, very Interesting. Hmmmm. Magnetic Coupling to Generator.
I worked on turbine generators @aep.
FYI: Background conversations are too loud n distracting.